Are you confronting difficulty while riding your bike? Is it not swift and smooth like before? One of the reasons for its poor functioning is the lack of effort on your part to clean and maintain it. Once you become negligent towards your bike, it is bound to get rust. The rust will continue to build upon the surface thus largely affecting the bike parts.

What Causes Rust?

how to remove rust form bikes

Nobody likes to experience rust on their ride. However, no one has control over it. The rust is basically the result of oxidation. When your bike parts like chain, handlebars, spokes, rim, or the mainframe made up of iron or steel are exposed to moisture, it gives rise to a new chemical reaction and this entire process is termed as oxidation. When the metal gets prone to this formula, new metal is formulated entitled iron oxide is born. This iron oxide is none other than what we call rust. Apart from this, when your bike comes in contact with humidity, air, or salt; it gives a boost to rusting.

How To Get Rid Of Rust From Bikes?

how to get rust off a bike

Fortunately, the rust from bikes is not hard to get rid of. The simple maintenance practices, precautions, home remedies, and DIY techniques can prove to a rescue. First and foremost, engage yourself in routine checkups of your ride and feed it whatever is required to stop it from deteriorating. Secondly, if your bike gets affected with rust, incorporate some of the effective home remedies and tackle this problem while being confined to the four walls of your home. Here is a list of some of the products that are pocket-friendly yet result-oriented for rust removal.

  • Baking Soda and Water
  • Fine Steel Wool
  • Vinegar
  • Aluminum Foil
  • Lemon Juice
  • Coca-cola

Let’s Get Acquainted With The Steps For Removing Rust From the Bike Parts

1. Removing Rust From Bike’s Chain

remove rust from bike chain

After a thorough examination of the bike chain, remove the chain and engage yourself in removing its rust. Initially, you need to decrease it by applying enough degreaser on the clean cloth. Cleaning it will detach the grease and dirt particles from the chain. Now, using the steel wool and lime juice, wash away the rust. Steel wool works wonders in removing rust from the chrome parts. However, don’t forget to wear gloves while using steel wool. Remove the lime juice with soapy water and clean it with a dry cloth. Now, the chain is ready to be re-attached.

2. Removing Rust from Bike’s Handlebars

how to remove rust from bike handlebars

Removing rust from Bike’s handlebars is a quite cost-effective way. You can use the mixture of salt mixed with lime juice. Apply the paste evenly on the handlebars. Allow it to sit for 20-25 minutes. Finally, wipe it with a clean cloth and let it dry. To make it rust-proof, apply wax or primer on it.

3. Removing Rust from Bike’s Rim

how to remove rust from bike parts

Rims are the most vulnerable part of the bike which are highly susceptible to moisture and other forms of dirt. Therefore, it calls for extra care. Before indulging in its cleaning process, remove the wheel and its rubber section. Here, a mix of baking soda and water is the dominant player. These natural ingredients are quite useful in washing away the adamant particles without damaging the metal. Evenly apply the mixture on the rim and scrub it with steel wool. This will take out the entire rust. Using a clean and dry cloth, wipe the rims.

4. Removing Rust from Bike’s Frame

removing rust from bike frame

The first step involved is to ascertain the extent of damage to the bike’s frame. In scraping off its rust, a variation of baking soda and vinegar works the best. Cover the frame sections evenly with the paste and let it sit for 10-15 minutes. Once the time has elapsed, remove the paste using a sponge and wipe it with a clean and dry cloth.

5. Removing Rust from Bike’s Spokes

clean rust off bike
Eliminating rust from bike’s spokes is a quite mind-numbing task. Getting in contact with each spoke is time-consuming. Ensuring that rust from every minuscule area is taken off, it is highly recommended to use steel wool with fine grains. Apply the paste of vinegar or lime juice and then scrub it on each spoke. This may call for repetitive cleaning. Once the rust is removed, wipe it with a clean and dry cloth.

No matter, your bike is subjected to outdoor elements or is at rest in your home, the rust is sure to attack it. Therefore, remember prevention is always better than cure. To prevent rust from accumulating time and again, rust-proof your bike. Otherwise, your entire efforts to get rid of the rust will be in vain. Rust-proofing will ensure the durability of your ride. How to rust-proof your bike? Let’s have a look.

Once the rust is completely put an end to, lubricate the chain by applying good quality lubricants such as grease, wax, vaseline, or oil. The act of lubricating keeps the bike’s chain and the exterior elements far away from each other.

Make a habit to regularly clean your bike and wiping it with a dry towel.
If you come across the damaged paint part of your bike, re-paint it. This offers an added layer of protection and keeps rusting at bay.

Rusting can steal the entire luster of your bike and leave it deteriorated. Its protection is entirely in your hand. Your continuous maintenance practices and taking care of it like your own child can go a long way in ensuring the long life of your bike.